Dinger Boat Plan

Building the Atkin Dinghy Vintage

Okay! Its finally time to get started on this winters build!

The goal is to build the William Atkin designed Vintage in time for the "I Built It Myself" show at the Wooden Boat Show in Mystic, CT.

Why Vintage? Several reasons.
 
First, I think its time I tackled a round-bottom boat. Again, I think this is a project that is way above my current skill level, but Im a real believer in the adage that people can do more than they think they can. Just because I doubt my ability to build such a complicated boat, is no reason to not do it.

Sounds weird, right? Ah well.

William Atkin Vintage 10 round-bottom lapstrake

Second, I want to do a lot of cruising with Helena & family in the Blue Moon over the next few summers. Good old Cabin Boy is perfect for one person, and will carry two if I install the forward thwart to balance the load, but three would be really pushing it. Since the Blue Moon is too small to carry a dinghy on deck, I dont think it matters whether I drag a 8 or 10 dinghy, so might as well be comfortable with the 10 Vintage. 

Third, I really like the Atkin designs and Pat Atkin is a great help, and I happen to live in the town that William Atkin got his start in, back in 1906. So for me, it makes sense to stick with the Atkins.

Fourth, Id like to see if I can find ways to make these very traditional designs more accessible to rank-amateur builders like me. It seems to me that a lot of people are building simpler boats because they think something as complicated as Vintage is too hard for them. If I can find ways to simplify the build, that might make it easier for others to build these beautiful boats.

Hey, if a duffer like me can build it, anyone can!

But the winter is slipping away fast! Helena convinced me to set up a simple project plan to keep me on track. Good thing she did, because it helped me get in a more business-like frame of mind. This should help keep me focused. I tend to get distracted by interesting side issues like cutting my own lumber from county forest land. Interesting, but not compatible with my schedule!

I should be able to make the show deadline, but must get cracking, because theres a lot to do!

The first step was to set up a decent work space. Its the same basement space I used to build Cabin Boy, but then it was a bit of a cluttered mess. I decided to start fresh with a completely empty room, except for some shelves and benches.

Building space, after passing cat inspection photo jalmberg

Other end, with Thinking Chair ready to go photo jalmberg

I already received the plans from Pat, so the next step was to build a lofting board.

For Cabin Boy, I used 1/4" plywood. I found this to be too thin to hold the nails needed for bending battens for curves, so decided to go with 3/4" plywood. I found a couple good quality sheets at HD for $25 each. A steal.

Since I needed a 13 board, I needed to cut one of the sheets. This was a lot harder than I thought it would be. I thought I could use my jigsaw by clamping a kind of fence to the board, but that idea failed miserably! Each time I cut (and I tried several times) the line would veer off to the left. Why???

I thought maybe the clamped jig was moving, but obviously it wasnt.

Finally I figured out that the blade was bending to the left. Why always to the left, I don’t know, but it did.

The wrong tool for the job photo jalmberg

That taught me two things:  you can’t use a jig saw for this type of cutting (maybe that’s why boat builders don’t like jigsaws?), and it pays to make test cuts on scrap lumber! Doh!

Well, no harm done.

The jigsaw was my only power saw, so it was time to break out the hand saws. I tried several different approaches, but what finally worked was cutting the sheet vertically with a Japanese pull saw. This made a clean, accurate, 90 degree cut with very little effort.

The all-purpose Japanese pull saw photo jalmberg

So the pull saw saved me again, but my next job is to rip a couple 13 battens from 3/4" clear pine. Its clear I need a better tool for this job.

>>> Next Episode: Lofting Board